The Gas Flare Secret Why Flaring is 34 Times Better Than Not Flaring
A gas flare, alternatively known as a flare stack, is a gas combustion device used in industrial plants such as petroleum refineries, chemical plants, natural gas processing plants as well as at oil or gas production sites having oil wells, gas wells, offshore oil and gas rigs and landfills.
Keep watching to learn why gas flares reduce climate change.
Flare stacks are primarily used for burning off unwanted flammable gas released by pressure relief valves, for the following reasons:
1 - Flare stacks are often used for the planned combustion of gases over relatively short periods such as when carrying out new gas plant start-ups.
2 - During unplanned over-pressuring of plant equipment, including emergency breakdown of equipment.
3 - During plant shutdowns, which are usually for equipment maintenance.
4 - In the case of landfill gas, flaring is done when the amount and quality of the landfill gas is too low for economic use.
5 - To reduce climate change.
Methane's estimated global warming potential is 34 times greater than that of Carbon Dioxide (CO2).
Therefore, to the extent that gas flares convert methane to CO2 before it is released into the atmosphere, they reduce the amount of global warming that would otherwise occur.
Source: Wikipedia "Gas Flare".
Visit https://landfill-gas.com/landfill-gas-flares for more info.
The 10 Most Deadly Plastics Found Most Often in Rivers and Lakes
The 10 worst plastic pollutants in rivers and lakes ranked by prevalence are:
1 - Plastic bottles and lids.2 - Food wrappers (crisp packets and sweet wrappers).3 - Cigarette butts4 - Sanitary items (nappies, sanitary towels, tampons and wet wipes).5 - Plastic or polystyrene takeaway containers.6 - Cotton bud sticks7 - Plastic or polystyrene cups.8 - Smoking-related packaging.9 - Plastic straws, stirrers and cutlery.10 - Plastic bags.
The Plastic Rivers report, published today (8 April 2019) in association with Plastic Oceans UK, has analysed data from nine studies of freshwater sources across the UK and Europe, revealing the worst ten plastic pollutants in the UK’s rivers and lakes.
It ranked types of macroplastic by prevalence, focusing on consumer items and excluding items relating to fishing, agriculture and industry.
Plastic bottles are the biggest contributor to freshwater plastic pollution, followed by food wrappers and cigarette butts, the research found.
Much of the plastics focus to date has been on the shocking impact pollution is having on ocean species, but up to 80% of the plastic in our seas actually comes from rivers. Understanding the situation in freshwater environments is an essential but often overlooked factor in stemming the tide of plastic reaching our oceans.
The Plastic Rivers report shows that the products we buy every day are contributing to the problem of ocean plastic. Our discarded plastic enters rivers from litter generated by our on-the-go lifestyle and items we flush down our toilets. This throw-away approach is having much more serious consequences much more serious consequences than previously imagined, and the report shows really simple ways to avoid this problem and stop plastic pollution.
Click the link above to see the full article, or go to CIWM Online and search "plastic pollution".
Worldwide reliance on disposable plastic packaging is overwhelming our planet.
By 2050, the oceans will contain more plastic than fish by weight.
Plastic pollution is toxic to human health.
Even babies are born pre-polluted.
Plastic pollution and climate change are parallel global emergencies.
Plastic is a petroleum product; to truly divest from fossil fuels, we must reduce our collective plastic footprint. via www.plasticpollutioncoalition.org
Why is Plastic Litter and Pollution Growing So Fast?
The world population is living, working, vacationing, increasingly conglomerating along the coasts, and standing on the front row of the greatest, most unprecedented, plastic waste tide ever faced.
Washed out on our coasts in obvious and clearly visible form, the plastic pollution spectacle blatantly unveiling on our beaches is only the prelude of the greater story that unfolded further away in the world’s oceans, yet mostly originating from where we stand: the land.
For more than 50 years, global production and consumption of plastics have continued to rise. An estimated 299 million tons of plastics were produced in 2013, representing a 4 percent increase over 2012, and confirming and upward trend over the past years.
(See: Worldwatch Institute – January 2015). In 2008, our global plastic consumption worldwide has been estimated at 260 million tons, and, according to a 2012 report by Global Industry Analysts, plastic consumption is to reach 297.5 million tons by the end of 2015. via plastic-pollution.org
Is More Recycling the Solution?
Not really. Recycling does not really address plastic pollution, since recycled plastic is "properly" disposed of. Whereas, plastic pollution comes from improper disposal.
Since the ocean is downstream from nearly every terrestrial location, it is the receiving body for much of the plastic waste generated on land. Several million tonnes of debris end up in the world's oceans every year, and much of it is improperly discarded plastic litter.
The first oceanographic study to examine the amount of near-surface plastic debris in the world's oceans was published in 2014. It estimated that at least 5.25 trillion individual plastic particles weighing roughly 244,000 tonnes (269,000 tons) were floating on or near the surface.
A Seriously Damaging Effect at the Bottom of the Food Chain
Because it comes in sizes large and small, polluting plastics even affect the world's tiniest organisms such as plankton.
When these organisms become poisoned due to plastic ingestion, this causes problems for the larger animals that depend on them for food. This can cause a whole slew of problems, each step further along the food chain. Plus, it means that plastic are present in the fish that many people eat everyday.
Most of the litter and pollution affecting the world's oceans derives from plastics. This is having had terrible consequences on many marine species, which can lead to consequences for those that eat fish and marine life for nutrients – including people. via www.conserve-energy-future.com
Sources of Ocean Plastic - Mismanaged Waste and Inadequately Disposed Waste
Mismanaged waste is material which is at high risk of entering the ocean via wind or tidal transport, or carried to coastlines from inland waterways.
Mismanaged waste is the sum of material which is either littered or inadequately disposed.
Inadequately disposed and littered waste are different, and are defined in the sections below.
Inadequately disposed waste is that which has the intention of being managed through waste collection or storage sites, but is ultimately not formally or sufficiently managed.
This includes disposal in dumps or open, uncontrolled landfills; this means the material is not fully contained and can be lost to the surrounding environment.
This makes it at risk of leakage and transport to the natural environment and oceans via waterways, winds and tides. via ourworldindata.org
There are many exciting developments in the latest predictions of the top renewable energy trends of 2019!
The adoption of renewable energy is proceeding at least as rapidly as was hoped globally.
Experts at Bloomberg New Energy Finance say that renewable energy is now at the point where it can equally compete with fossil fuels.
That’s really good news for decarbonising the globe, but within that overall picture there’s a great deal more of interest by diving into each renewable energy technology.
Read our article to find out more about solar panel advances, the trend in wind-farm reliability up-sizing, plus Microgrid AI implementation.
And, finally, the latest trend for communities and companies to pledge just how deeply they intend to go into renewable energy use.
Visit our article on the Renewable Energy Trends Of 2019 by clicking the link below, or go to wastersblog.com/retrends .
2019 promises to be an exciting year for clean tech. An increasing number of countries, companies and regions are embracing sustainable energy generation and the landscape is rapidly evolving.
Australian Renewables On Track For 78% By 2030 On Current Trends
Specifically, according to Green Energy Markets, if Australia maintains its current record rate of both rooftop solar installations, as well as wind and solar farm construction commitments that have prevailed since 2017, then renewable energy would account for 78% of electricity supply across Australia’s west and east coast main grids by 2030 — up from their current contribution of 22.5% in October.
October saw the Australian solar industry install another 150 megawatts (MW) of residential and business solar, a new record, 76% higher than the monthly average of 2017, which itself was a record year for installations.
So far this year, rooftop solar installations have reached 1,243 MW for the year so far. Meanwhile, a total of 412 MW worth of large-scale wind and solar projects committed to construction in October, bringing the year-to-date total commitments up over 3,200 MW. via CleanTechnica
Projecting 2018 Trends and Macroeconomic Conditions: What to Expect for Renewable Energy Projects in 2019
Renewable energy projects were marked by distinctive trends and characteristics in 2018:
a frothy.
A market driven by a crush of liquidity and a shortage of project supply
a highly competitive environment among investors and lenders for an inadequate supply of projects.
They also predict continued focus on alternative off-take structures with shorter tenors, such as corporate PPAs and energy derivatives, and unconventional credit, such as community customers.
Shoots of energy storage solutions sprouting from the ground as stand-alone facilities and add-on’s are likely for wind and solar projects. via 2018 Trends
Top Trends To Watch In Renewable Energy In 2019
This year has seen several major policy changes in renewable energy, especially in solar.
China surprised everyone in June by announcing that it would not issue approvals for any new solar power installations in 2018 and would also cut the feed-in tariff subsidy.
In February, the U.S. imposed tariffs on imported solar cells and modules, creating uncertainty in the U.S. solar market.
The solar market globally is set to adapt to those industry disruptions next year. Together with continued declines in solar and wind costs, 2019 could be a brighter year for the U.S. solar and renewable energy markets, analysts and industry professionals say. via OilPrice.com
Big Data Analytics, Machine Learning and AI in the Renewable Energy Sector
Analytics, Machine Learning, and artificial intelligence (AI) are used to interpret the past, optimize the present and predict the future.
The energy sector heavily depends on optimization and predictions for energy production, energy grid balancing, and consumption habits.
Additionally, the energy industry produces massive amounts of data. To turn this data into insights to improve productivity and cut costs, major energy players are turning to AI. via AI Trends
Attribution of Images in the Video at the top of this page:
This presentation contains images that were used under a Creative Commons License. Click here to see the full list of images and attributions: https://app.contentsamurai.com/cc/259848
Executing the numerous tools to decrease waste needs resources and commitment. While starting the usage of one of these tools is nearly definitely the finest response for a lot of business, easy options might be executed instantly to jump-start your waste decrease.
Do an waste audit and develop a stock of waste your operations produce, set an order of value for the associated expenses to fund, shop and handling of each waste type. Next, designate job duties to people for lowering each waste type. it will be their obligation to remedy high waste creating sources.
You need to bury any prejudgments about your waste being an unavoidable result of the company. Keep in mind that the majority of the waste product that is produced and disposed of in producing procedures can be recycled and recycled.
Consist of all employees so not simply will they comprehend what's happening nevertheless similarly so the waste-reduction efforts are carried out collectively. Establish regular, constant training and education in waste decline to promote awareness and understanding. Reward and market any waste-reduction efforts by employees.
Setting up sophisticated options such as laser cutting innovation can assist make sure that you are developing the least waste possible.
Utilizing innovative software application and other services such as laser cutting innovation can assist make sure that you are creating as little waste as possible.
6 Ideas for a More Productive Waste Management System
The construction waste management system in any construction company is the set of internal procedures which staff must follow to manage the waste produced on every site, in accordance with company policy.
The Construction Waste Management System, once neglected and even seen as a waste of time, is now a central part of doing business for construction firms.
In this video we provide our tips for raising the effectiveness, and the benefits, from any construction company waste management system.
Keep reading this for our 6 tips:
1 - Lower the Amount of Produced Waste
Waste reduction is the most effective technique. It has for long been practised on construction sites.
For example, demolition rubble has always been used beneath site roads and as non-compressible backfill.
The big win here is to extend this philosophy further, and find site uses for other demolition materials.
2 - Efficiently Separate Waste Types and keep materials clean for maximum recycling value.
3 - Recycle Building Materials which can't be re-used without processing.
The recycling example which has seen rapid advances in the last 10 years, is the crushing of reinforced concrete to produce aggregate for new concrete.
4 - When designing new buildings construction companies should ensure that their designers consider how the building or other structure will be easily demolished with maximum materials re-use.
Looking ahead beyond that is the consideration of how recycling will be enhanced at the end of the life of the structures built.
5 - Ensure that the company selects Eco-friendly materials.
6 - Keep One Step Ahead of Legislation
The circular economy is coming.
The most successful companies will be those that look ahead and develop the methods to lead with innovations implementing the circular economy.
Much better to do that than trying to catch-up after new regulations are introduced
Conclusion
A competent waste management process may look like an expensive endeavor at the start.
But, in the long run it pays off in more ways than one.
Many have reported substantial cost savings!
Not only does an effective Construction Waste Management System improve your company's public image, it also helps you run your business more efficiently.
To view this on the YouTube website go to: https://youtu.be/ZryOMb7z8yE
Read more at: http://landfill-site.com/waste-management-system.html
Recycling, is the latest practice for promoting Green living.
It means a procedure in which you process used materials and use them to make new products to keep the environment healthy and pollution-free.
Recycling helps in doing the following things in this regard;
1. It prevents excessive waste of useful materials.
2. It reduces the use of new raw materials.
3. It reduces energy use.
4. It reduces pollution of air and water.
5. It reduces the need for waste disposal to landfills.
6. It is a good way to lower greenhouse gas emissions.
What can be recycled?
Many products are recyclable such as paper, plastic, scrap metals, glass, textiles, and electronics.
Why Is Recycling So Important?
Along with the appalling fact, that globally the amount of waste is increasing year on year.
The average household in the United Kingdom produces more than 1 tonne of waste each year which is a shocking amount.
This equates to around 31 million tonnes a year in the United Kingdom, this is the equivalent to the weight of three and a half million double-decker buses.
When all this waste ends up in the landfills, it becomes a cause of air, soil and water pollution because they contain various harmful substances.
Therefore, it is really important to dispose of the waste in an appropriate way (i.e. recycling).
The good thing you should remember is that up to 60% of the waste that ends up in the dustbin can be recycled.
Through a proper recycling process, unused products are recycled and reused for making new products.
Now read the full article at https://wastersblog.com/wir
We make videos. For your video quote email steve@ippts.com
